1. Electronic wires and coiled wires shall not contact with acidic, alkaline and mineral oils, and shall be separated from these corrosive substances for storage. Otherwise, the wire will be corroded, and it will not be kept for long; 2. Try to prevent the wire from being stored in the open air

Teflon wire is a kind of wire that can withstand high temperature. It usually adopts solid core or stranded silver or nickel plated copper wire. Product characteristics: 1. Working temperature: - 80~+250 ℃; It can withstand 300 ℃ in a short time. 2. Conductor: solid or stranded silver or nickel plat

High temperature wire is considered as any insulated wire or multi-core cable with rated working temperature of 150 ° C and above. Fengming Cable Factory can produce a full range of single conductor and multi-core high-temperature products. Silica gel products: SRG (150 ° C-200 ° C)

PTFE (F4) is polytetrafluoroethylene, which has good temperature resistance and corrosion resistance. It can resist the corrosion of any medium, and its color is white. The chemical properties of PFA FEP PTFE are similar, but FEP can only be used below 200 degrees, and PTFE cannot be injected. Sever

Teflon FEP: FEP (fluorinated ethylene propylene copolymer) non stick coating melts and flows to form a non porous film during baking. It has excellent chemical stability, excellent non stick characteristics. The Teflon coated cable has the following characteristics

The ethylene component in ETFE improves the radiation resistance. Flexibility, hardness, cold flow and other mechanical properties, are also better than PTFE and FEP. These excellent properties, coupled with the ease of processing, increase the application value of ETFE electronic wires, especially

At present, the cable industry is accustomed to collectively refer to cables with certain fire resistance, such as flame retardant, halogen-free low-smoke, low-halogen low-smoke, and fire resistance, as fire-resistant cables.Flame retardant cableThe feature of flame retardant cable is to delay the s

The mica wrapping tape for refractory cables is made of phlogopite mica paper and glass fiber as reinforcement, and is synthesized with imported 10110 heat-resistant silicone resin. The tape is formed by mechanical slitting. The finished product is non-sticky under normal conditions, has good softne

Heating cables in which resistance wires (heat generating wires) are wound in a spiral shape around a core filament, an additional intermediate layer is formed by molding, and then a second layer of resistance wires (detection wires) is wound and insulating treatment is performed with silicone.Safe

INSULATED HEATER WIREFongming Cable is professional in the development of specially fabricated silicone and fiberglass insulated resistance wire for refrigeration anti-condensate applications. These heating elements are available in a broad range of resistances